TrailMap TAR - Transalpine Run | 2026
Solid oak with laser-engraved contour lines, your route as a raised line in the color of your choice on top, checkpoint names on request. Cartography for the wall.
Configure your TrailMap
Your summit moment, forever in your hands.
True to scale next to an A4 sheet, selected: . 30 × 30 cm oak, larger than an A4 sheet, approx. 2 cm thick. Version: engraved contour lines.
White stands out with the most contrast on the oiled oak.
Deine Gravur
Wird 1:1 so graviert, wie Du es hier einträgst.
Every TrailMap is a handmade one-of-a-kind piece, engraved exactly as you want it. And if something still isn't right, we'll find a solution. That's a promise.
47.6646° N · 12.6463° E · Workshop in the Bavarian Alps
Not sure about the size or map area? Write to us. We'll help you personally.
When will your TrailMap arrive?
Duties and import taxes included for the US, UK, Switzerland, Liechtenstein, Norway, Andorra, Australia and New Zealand.
What you get.
Engraved and raised
The contour lines are laser-engraved into the oiled oak, and the route sits on top as a raised line in the color of your choice: flatter and more cartographic than Mountain Model Track.
Accurate to the millimeter
Exact LiDAR elevation data from the state surveying offices, measured by laser, accurate to 0.5 m.
Checkpoints & names
Place names along the route and finisher engraving, typical for event editions.
Solid oak
30 × 30 cm, oiled, PEFC, with a hanger for the wall.
Planning an event edition?
Finisher trophies with event badge, checkpoint engraving and serial numbering, volume discount from 10 pieces, logo engraving and branding included.
About this TrailMap
TAR - Transalpine Run 2026, seven stages from Lenzerheide to Locarno: 244 kilometers and 14,160 meters of elevation gain across the Alps. This TrailMap shows the route as a contour-line map, laser engraved in solid oak, the course as a raised 3D line on top.
Seven stages across the Alps
Since 2005, the Transalpine Run has led across the Alps in seven stages, run in a team of two or solo. In 2026 it takes a completely new route: starting on August 28 with a loop around Lenzerheide, then via Ilanz, Vrin, Olivone, Biasca and Sonogno, finishing on September 3 in Locarno. From the valley floor at 195 meters up to 2,590 meters, every one of these stages is on the map.
The 2026 stages
- Stage 1, 28.08.: Lenzerheide, loop, 19.0 km, 1,275 m of ascent
- Stage 2, 29.08.: Lenzerheide to Ilanz, 49.5 km, 1,995 m of ascent
- Stage 3, 30.08.: Ilanz to Vrin, 30.0 km, 2,250 m of ascent
- Stage 4, 31.08.: Vrin to Olivone, 39.0 km, 2,250 m of ascent
- Stage 5, 01.09.: Olivone to Biasca, 35.5 km, 2,150 m of ascent
- Stage 6, 02.09.: Biasca to Sonogno, 29.5 km, 2,248 m of ascent
- Stage 7, 03.09.: Sonogno to Locarno, 41.5 km, 1,992 m of ascent
TAR2026 and RUN2
Both events are available as a TrailMap. TAR2026 carries the full route across all seven stages. RUN2 shows the first two days, which are run as a separate event in a team of two: 70 kilometers and 3,265 meters of elevation gain, the Lenzerheide loop and Lenzerheide to Ilanz.
What is on the map
The contour lines are created from exact LiDAR elevation data and engraved into the oak plate, along with the names of all stage finishes. The course sits on the map as a 3D-printed line, with a raised marker at each stage finish. Below the map, your name, your time and your placing are engraved. Available in two sizes and four track colors.
For finishers and their crews
Seven days from Lenzerheide to Locarno, via Vrin, Olivone and Sonogno: anyone who ran this week will recognize every stage by its profile. The TrailMap brings them to your wall, with your own name and your own time below.
alpen-werk is not affiliated with the official organizer.
Questions & answers.
01What is the difference to Mountain Model Track?
Mountain Model Track models your tour as a raised 3D line on the printed model. The TrailMap engraves the contour lines flat into solid oak and places your route on top as a raised line in the color of your choice: a cartographic look, ideal for events and checkpoint names.
02What does LiDAR mean, and why does it make your model so accurate?
LiDAR is airborne laser surveying: an aircraft scans the terrain with millions of laser points, and the official state surveying offices turn them into an elevation model with a resolution of up to 0.5 m. This is exactly the data your model is based on, which is why every ridge, every gully and every summit sits exactly where it really is. Freely available satellite elevation data only resolves to 30 m, which is 60 times coarser. On top of that, we prepare every dataset for 3D printing in a dedicated quality step: cleaned, smoothed, with sharp rock edges and without digital artifacts.
03Which routes work?
Any GPX route, from a trail run to a Transalp to your home loop. A Komoot link, your Strava login or a GPX file you upload yourself is all it takes.
04What can be engraved?
Route, contour lines, checkpoint names along the route, finisher name and time, and for event editions also the organizer's logo as a single-color engraving.
05How long does delivery take?
Standard: 3 to 8 business days production plus shipping 1 to 7 business days. Express: 2 to 4 business days plus express shipping 1 to 2 business days. For the US, UK, Switzerland, Liechtenstein, Norway, Andorra, Australia and New Zealand, customs duties and import taxes are included (DDP).
06Is there a volume discount for events?
Yes, from 10 pieces, with logo engraving and custom branding included. Commission models for clubs are possible too. Get in touch via the B2B inquiry.
07What if something isn't right?
Every TrailMap is made to order (no right of withdrawal under §312g of the German Civil Code). If something isn't right, we will find a solution. That's a promise.
Technical data.
- Line
- TrailMap · engraved oak, raised route
- Format
- 30 × 30 cm · Fixed price
- Version
- Engraved contour lines + route
- Track colors
- White · Light gray · Anthracite · Black
- Material
- Solid oak, oiled (PEFC)
- Mounting
- Hanger for the wall
- Elevation data
- LiDAR elevation data from the official state surveying offices, measured by laser, accurate to 0.5 m
- Precision
- More precise than models made from freely available elevation data