TrailMap TAR - Transalpine Run | 2024
Solid oak with laser-engraved contour lines, your route as a raised line in the color of your choice on top, checkpoint names on request. Cartography for the wall.
Configure your TrailMap
Your summit moment, forever in your hands.
30cm x 30cm
True to scale next to an A4 sheet, selected: . 30 × 30 cm oak, larger than an A4 sheet, approx. 2 cm thick. Version: engraved contour lines.
White stands out with the most contrast on the oiled oak.
Deine Gravur
Wird 1:1 so graviert, wie Du es hier einträgst.
Every TrailMap is a handmade one-of-a-kind piece, engraved exactly as you want it. And if something still isn't right, we'll find a solution. That's a promise.
47.6646° N · 12.6463° E · Workshop in the Bavarian Alps
Not sure about the size or map area? Write to us. We'll help you personally.
When will your TrailMap arrive?
Duties and import taxes included for the US, UK, Switzerland, Liechtenstein, Norway, Andorra, Australia and New Zealand.
What you get.
Engraved and raised
The contour lines are laser-engraved into the oiled oak, and the route sits on top as a raised line in the color of your choice: flatter and more cartographic than Mountain Model Track.
Accurate to the millimeter
Exact LiDAR elevation data from the state surveying offices, measured by laser, accurate to 0.5 m.
Checkpoints & names
Place names along the route and finisher engraving, typical for event editions.
Solid oak
30 × 30 cm, oiled, PEFC, with a hanger for the wall.
Planning an event edition?
Finisher trophies with event badge, checkpoint engraving and serial numbering, volume discount from 10 pieces, logo engraving and branding included.
About this TrailMap
Transalpine Run (TAR) 2024, seven stages from Garmisch-Partenkirchen across the main Alpine ridge to Lake Reschen in South Tyrol. This TrailMap shows the route as a contour line map, laser engraved into solid oak, with the route as a raised 3D line on top.
From Garmisch-Partenkirchen to Lake Reschen
Since 2005, the Transalpine Run has crossed the main Alpine ridge in seven days, on changing routes. The organizer had announced the 19th edition in advance as one of the toughest and most spectacular in the history of the race, and so it was: heat, rain, cold and snow, with helmets mandatory on some stages. With snow from 1,500 meters, the start of the sixth stage was moved from Samnaun down into the Inn Valley to Martina, and the final stage to Lake Reschen was shortened. In the end, according to the organizer, it came to 250 kilometers and over 15,000 meters of elevation gain.
The 2024 stages
- Stage 1: Garmisch-Partenkirchen to Nassereith
- Stage 2: Nassereith to Imst, finish of the RUN2
- Stage 3: Imst to See, the queen stage
- Stage 4: See to Ischgl, in rain and wind
- Stage 5: Ischgl to Samnaun in Switzerland
- Stage 6: Martina to Nauders, start moved from Samnaun to the Inn Valley
- Stage 7: Nauders to Lake Reschen
What is on the map
The contour lines come from precise LiDAR elevation data and are engraved into the oak plate. The route sits on the map as a 3D-printed line, in white, light gray, anthracite or black. Your name, your time and your placing are engraved below the map. The map measures 30 x 30 cm and is made by us in the Chiemgau.
For finishers and their crews
Garmisch-Partenkirchen, Ischgl, Samnaun, Lake Reschen: for everyone who ran this week to the finish as a two-person team or solo, and for those who waited for them in the stage towns.
alpen-werk is not affiliated with the official organizer.
Questions & answers.
01What is the difference to Mountain Model Track?
Mountain Model Track models your tour as a raised 3D line on the printed model. The TrailMap engraves the contour lines flat into solid oak and places your route on top as a raised line in the color of your choice: a cartographic look, ideal for events and checkpoint names.
02What does LiDAR mean, and why does it make your model so accurate?
LiDAR is airborne laser surveying: an aircraft scans the terrain with millions of laser points, and the official state surveying offices turn them into an elevation model with a resolution of up to 0.5 m. This is exactly the data your model is based on, which is why every ridge, every gully and every summit sits exactly where it really is. Freely available satellite elevation data only resolves to 30 m, which is 60 times coarser. On top of that, we prepare every dataset for 3D printing in a dedicated quality step: cleaned, smoothed, with sharp rock edges and without digital artifacts.
03Which routes work?
Any GPX route, from a trail run to a Transalp to your home loop. A Komoot link, your Strava login or a GPX file you upload yourself is all it takes.
04What can be engraved?
Route, contour lines, checkpoint names along the route, finisher name and time, and for event editions also the organizer's logo as a single-color engraving.
05How long does delivery take?
Standard: 3 to 8 business days production plus shipping 1 to 7 business days. Express: 2 to 4 business days plus express shipping 1 to 2 business days. For the US, UK, Switzerland, Liechtenstein, Norway, Andorra, Australia and New Zealand, customs duties and import taxes are included (DDP).
06Is there a volume discount for events?
Yes, from 10 pieces, with logo engraving and custom branding included. Commission models for clubs are possible too. Get in touch via the B2B inquiry.
07What if something isn't right?
Every TrailMap is made to order (no right of withdrawal under §312g of the German Civil Code). If something isn't right, we will find a solution. That's a promise.
Technical data.
- Line
- TrailMap · engraved oak, raised route
- Format
- 30 × 30 cm · Fixed price
- Version
- Engraved contour lines + route
- Track colors
- White · Light gray · Anthracite · Black
- Material
- Solid oak, oiled (PEFC)
- Mounting
- Hanger for the wall
- Elevation data
- LiDAR elevation data from the official state surveying offices, measured by laser, accurate to 0.5 m
- Precision
- More precise than models made from freely available elevation data