TrailMap Karwendelmarsch | 2026
Solid oak with laser-engraved contour lines, your route as a raised line in the color of your choice on top, checkpoint names on request. Cartography for the wall.
Configure your TrailMap
Your summit moment, forever in your hands.
True to scale next to an A4 sheet, selected: . 30 × 30 cm oak, larger than an A4 sheet, approx. 2 cm thick. Version: engraved contour lines.
White stands out with the most contrast on the oiled oak.
Deine Gravur
Wird 1:1 so graviert, wie Du es hier einträgst.
Every TrailMap is a handmade one-of-a-kind piece, engraved exactly as you want it. And if something still isn't right, we'll find a solution. That's a promise.
47.6646° N · 12.6463° E · Workshop in the Bavarian Alps
Not sure about the size or map area? Write to us. We'll help you personally.
When will your TrailMap arrive?
Duties and import taxes included for the US, UK, Switzerland, Liechtenstein, Norway, Andorra, Australia and New Zealand.
What you get.
Engraved and raised
The contour lines are laser-engraved into the oiled oak, and the route sits on top as a raised line in the color of your choice: flatter and more cartographic than Mountain Model Track.
Accurate to the millimeter
Exact LiDAR elevation data from the state surveying offices, measured by laser, accurate to 0.5 m.
Checkpoints & names
Place names along the route and finisher engraving, typical for event editions.
Solid oak
30 × 30 cm, oiled, PEFC, with a hanger for the wall.
Planning an event edition?
Finisher trophies with event badge, checkpoint engraving and serial numbering, volume discount from 10 pieces, logo engraving and branding included.
About this TrailMap
Karwendelmarsch 2026, the 17th edition on August 29, 2026, from Scharnitz through the Karwendel to Pertisau on Lake Achensee. This TrailMap shows the route as a contour-line map, laser-engraved in solid oak, with the route as a raised 3D line on top.
From Scharnitz to Lake Achensee
The Karwendelmarsch sees itself as a folk festival for hiking and mountain running enthusiasts. Running and marching take place on the same route, exclusively on existing trails through the Karwendel Nature Park, the largest nature park in Austria. From the start in Scharnitz, it leads via the Schafstallboden to the Karwendelhaus at 1,771 m and to the Falkenhütte at 1,848 m, then into the Eng, where the short route ends. The long route continues via Binsalm, Gramai Hochleger, Gramai Alm and Falzturn Alm to Pertisau on Lake Achensee, and the highest point is at 1,903 m on the Binssattel. Since 2023, part of the entry fees has gone to nature conservation projects of the nature park along the route. The revived march has existed since 2009.
The 2026 route
- KWM2026 | 52 km | 2,281 m gain: from Scharnitz via Karwendelhaus, Falkenhütte and Eng to Pertisau on Lake Achensee
- Size: L at 30 x 30 cm or S at 20 x 20 cm
- Track color: white, light gray, charcoal or black
What is on the map
The contour lines of the Karwendel are laser-engraved in solid oak, and the 52 km lie on top as a raised, 3D-printed line. Scharnitz and Pertisau are labeled. Engraved below the map: Karwendelmarsch 2026, 52 km and 2,281 meters of elevation gain, plus name, time and placement, just as you enter them when ordering. Handmade in the Bavarian Alps.
For finishers and their crews
Schafstallboden, Karwendelhaus, Binsalm and the finish in Pertisau: a keepsake of the Karwendelmarsch 2026 for marchers, runners and their families.
alpen-werk is not affiliated with the official organizer.
Questions & answers.
01What is the difference to Mountain Model Track?
Mountain Model Track models your tour as a raised 3D line on the printed model. The TrailMap engraves the contour lines flat into solid oak and places your route on top as a raised line in the color of your choice: a cartographic look, ideal for events and checkpoint names.
02What does LiDAR mean, and why does it make your model so accurate?
LiDAR is airborne laser surveying: an aircraft scans the terrain with millions of laser points, and the official state surveying offices turn them into an elevation model with a resolution of up to 0.5 m. This is exactly the data your model is based on, which is why every ridge, every gully and every summit sits exactly where it really is. Freely available satellite elevation data only resolves to 30 m, which is 60 times coarser. On top of that, we prepare every dataset for 3D printing in a dedicated quality step: cleaned, smoothed, with sharp rock edges and without digital artifacts.
03Which routes work?
Any GPX route, from a trail run to a Transalp to your home loop. A Komoot link, your Strava login or a GPX file you upload yourself is all it takes.
04What can be engraved?
Route, contour lines, checkpoint names along the route, finisher name and time, and for event editions also the organizer's logo as a single-color engraving.
05How long does delivery take?
Standard: 3 to 8 business days production plus shipping 1 to 7 business days. Express: 2 to 4 business days plus express shipping 1 to 2 business days. For the US, UK, Switzerland, Liechtenstein, Norway, Andorra, Australia and New Zealand, customs duties and import taxes are included (DDP).
06Is there a volume discount for events?
Yes, from 10 pieces, with logo engraving and custom branding included. Commission models for clubs are possible too. Get in touch via the B2B inquiry.
07What if something isn't right?
Every TrailMap is made to order (no right of withdrawal under §312g of the German Civil Code). If something isn't right, we will find a solution. That's a promise.
Technical data.
- Line
- TrailMap · engraved oak, raised route
- Format
- 30 × 30 cm · Fixed price
- Version
- Engraved contour lines + route
- Track colors
- White · Light gray · Anthracite · Black
- Material
- Solid oak, oiled (PEFC)
- Mounting
- Hanger for the wall
- Elevation data
- LiDAR elevation data from the official state surveying offices, measured by laser, accurate to 0.5 m
- Precision
- More precise than models made from freely available elevation data