TrailMap CTR - Chiemgau Trail Run | 2025
Solid oak with laser-engraved contour lines, your route as a raised line in the color of your choice on top, checkpoint names on request. Cartography for the wall.
Configure your TrailMap
Dein Gipfelmoment, für immer greifbar.
30cm x 30cm
Maßstabsgetreu neben DIN A4, gewählt: . 30 × 30 cm oak, larger than an A4 sheet, approx. 2 cm thick. Version: engraved contour lines.
White stands out with the most contrast on the oiled oak.
Deine Gravur
Wird 1:1 so graviert, wie Du es hier einträgst.
Jede TrailMap ist ein handgefertigtes Unikat, exakt nach Deinen Wünschen graviert. Und wenn doch etwas nicht passt, finden wir eine Lösung, versprochen.
47.6646° N · 12.6463° E · Workshop in the Bavarian Alps
Unsicher bei Größe oder Ausschnitt? Schreib uns. Wir helfen persönlich.
When will your TrailMap arrive?
Zoll und Einfuhrsteuern inklusive für USA, UK, Schweiz, Liechtenstein, Norwegen, Andorra, Australien und Neuseeland.
What you get.
Engraved and raised
The contour lines are laser-engraved into the oiled oak, and the route sits on top as a raised line in the color of your choice: flatter and more cartographic than Mountain Model Track.
Accurate to the millimeter
Exact LiDAR elevation data from the state surveying offices, measured by laser, accurate to 0.5 m.
Checkpoints & names
Place names along the route and finisher engraving, typical for event editions.
Solid oak
30 × 30 cm, oiled, PEFC, with a hanger for the wall.
Planning an event edition?
Finisher trophies with event badge, checkpoint engraving and serial numbering, volume discount from 10 pieces, logo engraving and branding included.
About this TrailMap
Chiemgau Trail Run 2025, four running distances in the Chiemgau Alps with start and finish in Marquartstein. This TrailMap shows the route as a contour line map, laser engraved into solid oak, with the course as a raised 3D line on top.
Two loops from Marquartstein
On May 10, 2025, the Chiemgau Trail Run took place in the Achental, where it has been held since 2017. The XL route led in the first loop over the Vorderalm to the Schnappenbergkirche and up the Großer Rechenberg, then back to the start area. The second half began with the climb to the Hochplatte, with a full panorama of the mountains and the Chiemsee, and continued to the east summit of the Kampenwand. The L route also ran in two loops, with the Vorderalm in the first and the climb to the Hochplatte in the second.
The 2025 routes
- XL: 61.4 km, two loops, with Hochplatte and Kampenwand
- L: 38.4 km, two loops over Vorderalm and Hochplatte
- M: 21.5 km
- S: 10.9 km
What is on the map
The contour lines are created from precise LiDAR elevation data and engraved into the oak board, along with place and mountain names, for the XL track for example Marquartstein, Kampenwand and Hochgern. The course of your distance sits on top as a 3D printed line. Beneath the map are the length and elevation gain of the route, plus your name, your time and your placement. Format 30 x 30 cm, track in white, light gray, anthracite or black.
For finishers and their crews
Vorderalm, Hochplatte, Kampenwand and the finish in Marquartstein: the TrailMap brings the run from the Achental to your wall, with your name and your time. Handmade in the Bavarian Alps, for finishers of every distance.
alpen-werk was a partner of the Chiemgau Trail Run 2025.
Questions & answers.
01What is the difference to Mountain Model Track?
Mountain Model Track models your tour as a raised 3D line on the printed model. The TrailMap engraves the contour lines flat into solid oak and places your route on top as a raised line in the color of your choice: a cartographic look, ideal for events and checkpoint names.
02What does LiDAR mean, and why does it make your model so accurate?
LiDAR is airborne laser surveying: an aircraft scans the terrain with millions of laser points, and the official state surveying offices turn them into an elevation model with a resolution of up to 0.5 m. This is exactly the data your model is based on, which is why every ridge, every gully and every summit sits exactly where it really is. Freely available satellite elevation data only resolves to 30 m, which is 60 times coarser. On top of that, we prepare every dataset for 3D printing in a dedicated quality step: cleaned, smoothed, with sharp rock edges and without digital artifacts.
03Which routes work?
Any GPX route, from a trail run to a Transalp to your home loop. A Komoot link, your Strava login or a GPX file you upload yourself is all it takes.
04What can be engraved?
Route, contour lines, checkpoint names along the route, finisher name and time, and for event editions also the organizer's logo as a single-color engraving.
05How long does delivery take?
Standard: 3 to 8 business days production plus shipping 1 to 7 business days. Express: 2 to 4 business days plus express shipping 1 to 2 business days. For the US, UK, Switzerland, Liechtenstein, Norway, Andorra, Australia and New Zealand, customs duties and import taxes are included (DDP).
06Is there a volume discount for events?
Yes, from 10 pieces, with logo engraving and custom branding included. Commission models for clubs are possible too. Get in touch via the B2B inquiry.
07What if something isn't right?
Every TrailMap is made to order (no right of withdrawal under §312g of the German Civil Code). If something isn't right, we will find a solution. That's a promise.
Technical data.
- Line
- TrailMap · engraved oak, raised route
- Format
- 30 × 30 cm · Fixed price
- Version
- Engraved contour lines + route
- Track colors
- White · Light gray · Anthracite · Black
- Material
- Solid oak, oiled (PEFC)
- Mounting
- Hanger for the wall
- Elevation data
- LiDAR elevation data from the official state surveying offices, measured by laser, accurate to 0.5 m
- Precision
- More precise than models made from freely available elevation data