TrailMap Ötztaler Radmarathon | 2026
Solid oak with laser-engraved contour lines, your route as a raised line in the color of your choice on top, checkpoint names on request. Cartography for the wall.
Configure your TrailMap
Dein Gipfelmoment, für immer greifbar.
Maßstabsgetreu neben DIN A4, gewählt: . 30 × 30 cm oak, larger than an A4 sheet, approx. 2 cm thick. Version: engraved contour lines.
White stands out with the most contrast on the oiled oak.
Deine Gravur
Wird 1:1 so graviert, wie Du es hier einträgst.
Jede TrailMap ist ein handgefertigtes Unikat, exakt nach Deinen Wünschen graviert. Und wenn doch etwas nicht passt, finden wir eine Lösung, versprochen.
47.6646° N · 12.6463° E · Workshop in the Bavarian Alps
Unsicher bei Größe oder Ausschnitt? Schreib uns. Wir helfen persönlich.
When will your TrailMap arrive?
Zoll und Einfuhrsteuern inklusive für USA, UK, Schweiz, Liechtenstein, Norwegen, Andorra, Australien und Neuseeland.
What you get.
Engraved and raised
The contour lines are laser-engraved into the oiled oak, and the route sits on top as a raised line in the color of your choice: flatter and more cartographic than Mountain Model Track.
Accurate to the millimeter
Exact LiDAR elevation data from the state surveying offices, measured by laser, accurate to 0.5 m.
Checkpoints & names
Place names along the route and finisher engraving, typical for event editions.
Solid oak
30 × 30 cm, oiled, PEFC, with a hanger for the wall.
Planning an event edition?
Finisher trophies with event badge, checkpoint engraving and serial numbering, volume discount from 10 pieces, logo engraving and branding included.
About this TrailMap
Ötztaler Radmarathon 2026, the 45th edition of the cycling marathon with start and finish in Sölden in the Ötztal, ridden on August 30, 2026. This TrailMap shows the route as a contour line map, laser engraved in solid oak, with the route as a raised 3D line on top.
Over Kühtai, Brenner, Jaufenpass and Timmelsjoch
The Ötztaler has existed since 1982, and since 2003 with start and finish in Sölden. From the Ötztal it goes over Oetz up to Kühtai (2,017 m) and over Kematen to Innsbruck. Via Schönberg in the Stubaital, Matrei and Steinach the route leads to the Brenner (1,374 m), then to Sterzing and over the Jaufenpass (2,094 m) to St. Leonhard in Passeier. There the climb to the Timmelsjoch (2,474 m) begins, over which the loop returns to Sölden.
The 2026 route
- 227 km | 5,500 m gain: Sölden, Kühtai, Innsbruck, Brenner, Sterzing, Jaufenpass, St. Leonhard in Passeier, Timmelsjoch, Sölden
What is on the map
The contour lines are engraved in dark brown into the oak, and the route lies on top as a 3D-printed line, in your choice of white, light gray, anthracite or black. Your name, your time and your placing are engraved below the map. The TrailMap comes in L at 30 x 30 cm and in S at 20 x 20 cm.
For finishers and their crews
From the climb to Kühtai over the Brenner and Jaufenpass to the Timmelsjoch and back to Sölden: a map for finishers and for the people who supported them along the course.
alpen-werk is not affiliated with the official organizer.
Questions & answers.
01What is the difference to Mountain Model Track?
Mountain Model Track models your tour as a raised 3D line on the printed model. The TrailMap engraves the contour lines flat into solid oak and places your route on top as a raised line in the color of your choice: a cartographic look, ideal for events and checkpoint names.
02What does LiDAR mean, and why does it make your model so accurate?
LiDAR is airborne laser surveying: an aircraft scans the terrain with millions of laser points, and the official state surveying offices turn them into an elevation model with a resolution of up to 0.5 m. This is exactly the data your model is based on, which is why every ridge, every gully and every summit sits exactly where it really is. Freely available satellite elevation data only resolves to 30 m, which is 60 times coarser. On top of that, we prepare every dataset for 3D printing in a dedicated quality step: cleaned, smoothed, with sharp rock edges and without digital artifacts.
03Which routes work?
Any GPX route, from a trail run to a Transalp to your home loop. A Komoot link, your Strava login or a GPX file you upload yourself is all it takes.
04What can be engraved?
Route, contour lines, checkpoint names along the route, finisher name and time, and for event editions also the organizer's logo as a single-color engraving.
05How long does delivery take?
Standard: 3 to 8 business days production plus shipping 1 to 7 business days. Express: 2 to 4 business days plus express shipping 1 to 2 business days. For the US, UK, Switzerland, Liechtenstein, Norway, Andorra, Australia and New Zealand, customs duties and import taxes are included (DDP).
06Is there a volume discount for events?
Yes, from 10 pieces, with logo engraving and custom branding included. Commission models for clubs are possible too. Get in touch via the B2B inquiry.
07What if something isn't right?
Every TrailMap is made to order (no right of withdrawal under §312g of the German Civil Code). If something isn't right, we will find a solution. That's a promise.
Technical data.
- Line
- TrailMap · engraved oak, raised route
- Format
- 30 × 30 cm · Fixed price
- Version
- Engraved contour lines + route
- Track colors
- White · Light gray · Anthracite · Black
- Material
- Solid oak, oiled (PEFC)
- Mounting
- Hanger for the wall
- Elevation data
- LiDAR elevation data from the official state surveying offices, measured by laser, accurate to 0.5 m
- Precision
- More precise than models made from freely available elevation data