TrailMap Watzmann Traverse
Solid oak with laser-engraved contour lines, your route as a raised line in the color of your choice on top, checkpoint names on request. Cartography for the wall.
Configure your TrailMap
Your summit moment, forever in your hands.
30cm x 30cm
True to scale next to an A4 sheet, selected: . 30 × 30 cm oak, larger than an A4 sheet, approx. 2 cm thick. Version: engraved contour lines.
White stands out with the most contrast on the oiled oak.
Every TrailMap is a handmade one-of-a-kind piece, engraved exactly as you want it. And if something still isn't right, we'll find a solution. That's a promise.
47.6646° N · 12.6463° E · Workshop in the Bavarian Alps
Not sure about the size or map area? Write to us. We'll help you personally.
When will your TrailMap arrive?
Duties and import taxes included for the US, UK, Switzerland, Liechtenstein, Norway, Andorra, Australia and New Zealand.
What you get.
Engraved and raised
The contour lines are laser-engraved into the oiled oak, and the route sits on top as a raised line in the color of your choice: flatter and more cartographic than Mountain Model Track.
Accurate to the millimeter
Exact LiDAR elevation data from the state surveying offices, measured by laser, accurate to 0.5 m.
Checkpoints & names
Place names along the route and finisher engraving, typical for event editions.
Solid oak
30 × 30 cm, oiled, PEFC, with a hanger for the wall.
Planning an event edition?
Finisher trophies with event badge, checkpoint engraving and serial numbering, volume discount from 10 pieces, logo engraving and branding included.
About this TrailMap
Watzmannüberschreitung, the tour over the three peaks of the Watzmann main ridge in Berchtesgaden National Park. This TrailMap shows the loop as a contour-line map, laser-engraved into solid oak, with the route as a raised 3D line on top.
Hocheck, Mittelspitze, Südspitze
The Watzmann is the central massif of the Berchtesgaden Alps, and its highest peak is the Mittelspitze. On the traverse, Hocheck, Mittelspitze and Südspitze are usually crossed from north to south, often in two stages: on the first day up to the Watzmannhaus, on the second over the three peaks and down into the Wimbachgries. This descent follows a steep path exposed to falls and rockfall, and through the scree basin you return to the starting points. From Hocheck to Mittelspitze the difficulties are moderate; between the Mittelspitze and the Südspitze there are climbing sections up to grade II. The total walking time is generally 12 to 15 hours. The main ridge was first traversed in 1868 by Johann Grill, known as the Kederbacher, and Johann Punz.
The route
- Watzmannhaus: Alpine Club hut and base for the traverse
- Hocheck: 2,651 m
- Mittelspitze: 2,713 m, highest peak of the Watzmann
- Südspitze: 2,712 m
- Wimbachgries: descent of 1,400 meters of elevation
What is on the map
The contour lines of the Watzmann massif are laser-engraved into solid oak, and the loop sits on top as a raised, 3D-printed line in white, light gray, anthracite or black. Watzmannhaus, Hocheck, Mittelspitze and Südspitze are labeled; below the map are Watzmannüberschreitung, 22.9 km and 2,400 meters of elevation gain. Format 30 x 30 cm, handmade in the Bavarian Alps.
Watzmannüberschreitung as a gift
Watzmannhaus, Mittelspitze, Wimbachgries: a keepsake for mountaineers who have completed the traverse, and for those who still have it ahead of them.
Questions & answers.
01What is the difference to Mountain Model Track?
Mountain Model Track models your tour as a raised 3D line on the printed model. The TrailMap engraves the contour lines flat into solid oak and places your route on top as a raised line in the color of your choice: a cartographic look, ideal for events and checkpoint names.
02What does LiDAR mean, and why does it make your model so accurate?
LiDAR is airborne laser surveying: an aircraft scans the terrain with millions of laser points, and the official state surveying offices turn them into an elevation model with a resolution of up to 0.5 m. This is exactly the data your model is based on, which is why every ridge, every gully and every summit sits exactly where it really is. Freely available satellite elevation data only resolves to 30 m, which is 60 times coarser. On top of that, we prepare every dataset for 3D printing in a dedicated quality step: cleaned, smoothed, with sharp rock edges and without digital artifacts.
03Which routes work?
Any GPX route, from a trail run to a Transalp to your home loop. A Komoot link, your Strava login or a GPX file you upload yourself is all it takes.
04What can be engraved?
Route, contour lines, checkpoint names along the route, finisher name and time, and for event editions also the organizer's logo as a single-color engraving.
05How long does delivery take?
Standard: 3 to 8 business days production plus shipping 1 to 7 business days. Express: 2 to 4 business days plus express shipping 1 to 2 business days. For the US, UK, Switzerland, Liechtenstein, Norway, Andorra, Australia and New Zealand, customs duties and import taxes are included (DDP).
06Is there a volume discount for events?
Yes, from 10 pieces, with logo engraving and custom branding included. Commission models for clubs are possible too. Get in touch via the B2B inquiry.
07What if something isn't right?
Every TrailMap is made to order (no right of withdrawal under §312g of the German Civil Code). If something isn't right, we will find a solution. That's a promise.
Technical data.
- Line
- TrailMap · engraved oak, raised route
- Format
- 30 × 30 cm · Fixed price
- Version
- Engraved contour lines + route
- Track colors
- White · Light gray · Anthracite · Black
- Material
- Solid oak, oiled (PEFC)
- Mounting
- Hanger for the wall
- Elevation data
- LiDAR elevation data from the official state surveying offices, measured by laser, accurate to 0.5 m
- Precision
- More precise than models made from freely available elevation data