TrailMap UTFS | 2026
Solid oak with laser-engraved contour lines, your route as a raised line in the color of your choice on top, checkpoint names on request. Cartography for the wall.
Configure your TrailMap
Dein Gipfelmoment, für immer greifbar.
S - 20 x 20cm
Maßstabsgetreu neben DIN A4, gewählt: . 30 × 30 cm oak, larger than an A4 sheet, approx. 2 cm thick. Version: engraved contour lines.
White stands out with the most contrast on the oiled oak.
Deine Gravur
Wird 1:1 so graviert, wie Du es hier einträgst.
Jede TrailMap ist ein handgefertigtes Unikat, exakt nach Deinen Wünschen graviert. Und wenn doch etwas nicht passt, finden wir eine Lösung, versprochen.
47.6646° N · 12.6463° E · Workshop in the Bavarian Alps
Unsicher bei Größe oder Ausschnitt? Schreib uns. Wir helfen persönlich.
When will your TrailMap arrive?
Zoll und Einfuhrsteuern inklusive für USA, UK, Schweiz, Liechtenstein, Norwegen, Andorra, Australien und Neuseeland.
What you get.
Engraved and raised
The contour lines are laser-engraved into the oiled oak, and the route sits on top as a raised line in the color of your choice: flatter and more cartographic than Mountain Model Track.
Accurate to the millimeter
Exact LiDAR elevation data from the state surveying offices, measured by laser, accurate to 0.5 m.
Checkpoints & names
Place names along the route and finisher engraving, typical for event editions.
Solid oak
30 × 30 cm, oiled, PEFC, with a hanger for the wall.
Planning an event edition?
Finisher trophies with event badge, checkpoint engraving and serial numbering, volume discount from 10 pieces, logo engraving and branding included.
About this TrailMap
UTFS 2026, the 5th Ultratrail Fränkische Schweiz on April 25, 2026 with start and finish on the market square in Ebermannstadt. This TrailMap shows the route as a contour-line map, laser-engraved in solid oak, with the route raised on top as a 3D line.
Castles, caves and steps in the Wiesent valley
The organizer is the club Ultratrailrunning Erlangen, and the premiere took place in 2022. The organizer describes the Ultratrail course as a constant up and down with rocks, castles, caves, dense forests and singletrails; more than 1,500 steps are built into the climbs. Along the way lie the Wiesent valley, Gößweinstein Castle, the steps of the Riesenburg and the sinter terraces. The Speedtrail turns into a long, steep climb after just a few hundred meters, passes the Neideck castle ruins down to Muggendorf and then switches to the other side of the valley for the last section.
The 2026 routes
- Ultratrail: 66 km, 2,760 m ascent, start and finish at the market square in Ebermannstadt
- Speedtrail: 33 km, from Ebermannstadt through the Wiesent valley to Muggendorf and back to the market square
What is on the map
Engraved are contour lines from exact LiDAR elevation data, places along the route and the UTFS logo, with the route sitting on top as a 3D-printed line. Below the map you will find the length and elevation gain of your route, plus your name, your time and your placement. Size 20 x 20 cm, track in white, light gray, anthracite or black.
For finishers and their crews
Ebermannstadt, Wiesent valley, Muggendorf and Riesenburg: the TrailMap preserves your UTFS, with name, time and placement. A gift for finishers and for club mates who lined up at the start.
alpen-werk is an official partner of UTFS.
Questions & answers.
01What is the difference to Mountain Model Track?
Mountain Model Track models your tour as a raised 3D line on the printed model. The TrailMap engraves the contour lines flat into solid oak and places your route on top as a raised line in the color of your choice: a cartographic look, ideal for events and checkpoint names.
02What does LiDAR mean, and why does it make your model so accurate?
LiDAR is airborne laser surveying: an aircraft scans the terrain with millions of laser points, and the official state surveying offices turn them into an elevation model with a resolution of up to 0.5 m. This is exactly the data your model is based on, which is why every ridge, every gully and every summit sits exactly where it really is. Freely available satellite elevation data only resolves to 30 m, which is 60 times coarser. On top of that, we prepare every dataset for 3D printing in a dedicated quality step: cleaned, smoothed, with sharp rock edges and without digital artifacts.
03Which routes work?
Any GPX route, from a trail run to a Transalp to your home loop. A Komoot link, your Strava login or a GPX file you upload yourself is all it takes.
04What can be engraved?
Route, contour lines, checkpoint names along the route, finisher name and time, and for event editions also the organizer's logo as a single-color engraving.
05How long does delivery take?
Standard: 3 to 8 business days production plus shipping 1 to 7 business days. Express: 2 to 4 business days plus express shipping 1 to 2 business days. For the US, UK, Switzerland, Liechtenstein, Norway, Andorra, Australia and New Zealand, customs duties and import taxes are included (DDP).
06Is there a volume discount for events?
Yes, from 10 pieces, with logo engraving and custom branding included. Commission models for clubs are possible too. Get in touch via the B2B inquiry.
07What if something isn't right?
Every TrailMap is made to order (no right of withdrawal under §312g of the German Civil Code). If something isn't right, we will find a solution. That's a promise.
Technical data.
- Line
- TrailMap · engraved oak, raised route
- Format
- 30 × 30 cm · Fixed price
- Version
- Engraved contour lines + route
- Track colors
- White · Light gray · Anthracite · Black
- Material
- Solid oak, oiled (PEFC)
- Mounting
- Hanger for the wall
- Elevation data
- LiDAR elevation data from the official state surveying offices, measured by laser, accurate to 0.5 m
- Precision
- More precise than models made from freely available elevation data