TrailMap ZUT | Zugspitz Ultratrail | 2026
Solid oak with laser-engraved contour lines, your route as a raised line in the color of your choice on top, checkpoint names on request. Cartography for the wall.
Configure your TrailMap
Your summit moment, forever in your hands.
True to scale next to an A4 sheet, selected: . 30 × 30 cm oak, larger than an A4 sheet, approx. 2 cm thick. Version: engraved contour lines.
White stands out with the most contrast on the oiled oak.
Deine Gravur
Wird 1:1 so graviert, wie Du es hier einträgst.
Every TrailMap is a handmade one-of-a-kind piece, engraved exactly as you want it. And if something still isn't right, we'll find a solution. That's a promise.
47.6646° N · 12.6463° E · Workshop in the Bavarian Alps
Not sure about the size or map area? Write to us. We'll help you personally.
When will your TrailMap arrive?
Duties and import taxes included for the US, UK, Switzerland, Liechtenstein, Norway, Andorra, Australia and New Zealand.
What you get.
Engraved and raised
The contour lines are laser-engraved into the oiled oak, and the route sits on top as a raised line in the color of your choice: flatter and more cartographic than Mountain Model Track.
Accurate to the millimeter
Exact LiDAR elevation data from the state surveying offices, measured by laser, accurate to 0.5 m.
Checkpoints & names
Place names along the route and finisher engraving, typical for event editions.
Solid oak
30 × 30 cm, oiled, PEFC, with a hanger for the wall.
Planning an event edition?
Finisher trophies with event badge, checkpoint engraving and serial numbering, volume discount from 10 pieces, logo engraving and branding included.
About this TrailMap
Zugspitz Ultratrail 2026, held June 18 to 20, 2026 around Garmisch-Partenkirchen, was run in heat and thunderstorm conditions on partly much shortened routes. This TrailMap shows your route as a contour line map, laser engraved in solid oak, with the route as a raised 3D line on top.
Rescheduled at short notice
A few hours before the start, the organizer adjusted several routes. The reasons were temperatures above 30 degrees, an unstable thunderstorm situation and an increased risk of lightning strikes at high altitude. The ZUT100, Germany's only alpine 100-mile race, lost about a third of its planned distance. Ultratrail and Ehrwald Trail were both shortened, their starts moved to Leutasch and brought forward significantly, so that the runners had the exposed mountain sections behind them earlier. Sections of the Leutasch Trail were also adjusted. The finish was in Garmisch-Partenkirchen. The Zugspitz Ultratrail has existed since 2011.
The 2026 routes
- ZUT100 | 107 km: the shortened version of the 100-mile race
- Ultratrail | 74 km: shortened, start in Leutasch
- Ehrwald Trail | 74 km: shortened, start in Leutasch
- Leutasch Trail | 69 km: start in Leutasch, some sections adjusted
- Mittenwald Trail | 44 km: start in Mittenwald
- Garmisch Partenkirchen Trail | 29 km: loop with start and finish in Garmisch-Partenkirchen
- Grainau Trail | 16 km: start in Grainau
What is on the map
The map carries the contour lines around the Zugspitze, laser engraved in solid oak, and your route as a raised, 3D-printed line in white, light gray, anthracite or black. Garmisch-Partenkirchen is labeled. Engraved below: Zugspitz Ultratrail 2026, the route with kilometers and elevation gain, plus name, time and placing, as you enter them when ordering. Two formats: L at 30 x 30 cm and S at 20 x 20 cm, handmade in the Bavarian Alps.
For finishers and their crews
The brought-forward starts in Leutasch, the heat and the finish in Garmisch-Partenkirchen: a memento of the ZUT 2026 for finishers and for the teams who got them through these days.
alpen-werk is not affiliated with the official organizer.
Questions & answers.
01What is the difference to Mountain Model Track?
Mountain Model Track models your tour as a raised 3D line on the printed model. The TrailMap engraves the contour lines flat into solid oak and places your route on top as a raised line in the color of your choice: a cartographic look, ideal for events and checkpoint names.
02What does LiDAR mean, and why does it make your model so accurate?
LiDAR is airborne laser surveying: an aircraft scans the terrain with millions of laser points, and the official state surveying offices turn them into an elevation model with a resolution of up to 0.5 m. This is exactly the data your model is based on, which is why every ridge, every gully and every summit sits exactly where it really is. Freely available satellite elevation data only resolves to 30 m, which is 60 times coarser. On top of that, we prepare every dataset for 3D printing in a dedicated quality step: cleaned, smoothed, with sharp rock edges and without digital artifacts.
03Which routes work?
Any GPX route, from a trail run to a Transalp to your home loop. A Komoot link, your Strava login or a GPX file you upload yourself is all it takes.
04What can be engraved?
Route, contour lines, checkpoint names along the route, finisher name and time, and for event editions also the organizer's logo as a single-color engraving.
05How long does delivery take?
Standard: 3 to 8 business days production plus shipping 1 to 7 business days. Express: 2 to 4 business days plus express shipping 1 to 2 business days. For the US, UK, Switzerland, Liechtenstein, Norway, Andorra, Australia and New Zealand, customs duties and import taxes are included (DDP).
06Is there a volume discount for events?
Yes, from 10 pieces, with logo engraving and custom branding included. Commission models for clubs are possible too. Get in touch via the B2B inquiry.
07What if something isn't right?
Every TrailMap is made to order (no right of withdrawal under §312g of the German Civil Code). If something isn't right, we will find a solution. That's a promise.
Technical data.
- Line
- TrailMap · engraved oak, raised route
- Format
- 30 × 30 cm · Fixed price
- Version
- Engraved contour lines + route
- Track colors
- White · Light gray · Anthracite · Black
- Material
- Solid oak, oiled (PEFC)
- Mounting
- Hanger for the wall
- Elevation data
- LiDAR elevation data from the official state surveying offices, measured by laser, accurate to 0.5 m
- Precision
- More precise than models made from freely available elevation data